• Aluminum • Coil spring provides plush suspension • Adjustable pre-load design • Micro-adjust seat clamp • 450 grams

Dimension Suspension Seatpost - Clamp Style: Std Rails - Diameter: 27.2mm - Length: 350mm - Material: Aluminum - Max Height: 255mm - Min Height: 130mm - Offset (mm): 0mm - Seatpost Type: Suspension - Travel (mm): 35mm - Weight: 450g

Choose from the many colors and add style to your ride with Origin-8's Compe-Lite Seat Post. It's crafted from light and durable 6000 aluminum, and features a single-bolt adjustable clamp for easy seat installation and fine-tuning.

The Salsa Guide Carbon Seatpost is lightweight, durable, and supportive when you need it most. - Carbon shaft - Bonded Aluminum two-bolt head

The Reverb Stealth features Vent Valve Technology for super simple service if the need arises. Redesigned internals provide effortless actuation and increased reliability. With reduced overall post lengths and new travel options, riders of all shapes and sizes benefit from more travel than ever before. The new Reverb Stealth redefines what it means to simply go up and down. - Shorter overall post length - Stealth Internal cable routing

3D forged one-piece AL6061-T6 construction - Wide saddle clamp design reduces rail stress and flex - Micro-adjust 2 bolt clamp design - 15mm setback - ISO-Mountain safety certified

The X-Fusion Manic post uses internal cable routing and was designed around a low-profile seat cradle and seal collar to fit a broad range of frames. The mechanism is air-sprung and hydraulically locked. The remote can be run on the left or right, above or below the handlebar, but is optimized as a left shifter replacement for 1x drivetrains. - Cable activated, hydraulic action, infinitely adjustable travel - Double key-way design prevents lateral twisting - Double bolt clamp with a wide range of seat angle adjustment. Fits both standard and 7 x 9 mm Carbon Rails - Sealed cartridge internals for quick replacement - Low profile head-seal and saddle clamp increase useable travel

- UD carbon shaft bonded to an AL6061-T6 alloy top clamp - Wide saddle clamp design reduces rail stress and flex - Micro-adjust 2 bolt clamp design - ISO-Mountain safety certified

Full UD carbon shaft with alloy clamp - Wide saddle clamp design reduces rail stress and flex - Micro-adjust 2 bolt clamp design - Available in 0mm and 15mm setback options - ISO-Mountain safety certified

The carbon Service Course SL seatpost is specifically tuned to be more shock absorbing than the "comfort" seatposts on the market, while still passing our strict internal MTB strength test. Flex engineered into the lightweight carbon tube keeps the rider comfortable over any terrain. Better fit means better performance, and if your saddle is out of position, you'll waste energy with every pedal stroke. The secure, two-bolt clamp makes for easy micro-adjustments of saddle position, and the head has been redesigned for maximum bolt-head accessibility. The Service Course SL seatpost makes it possible for nearly any rider to achieve the perfect fit, and the clamp works with all saddle rail types. - Distinctive Zipp cosmetics - Unidirectional Carbon fiber tuned for ride comfort - Lightweight clamping system - Lifetime warranty

The Highline 3 delivers infinite adjustment, smooth feel, and easy installation. Details - Premium Trelleborg sealing - Exclusive Igus LL-glide bearings and keys - Jagwire cable and housing - Self-contained hydraulic cartridge delivers industry-leading quality and reliability - Internal routing - Quick connect mechanism for ease of cable installation - Linear actuator for quick return speed - 2-bolt standard head - Remote sold separately

The minimal design of the ShockStop Seatpost blends seamlessly with the aesthetic of modern gravel, road, and e-bikes. Along with the ShockStop Stem, this system works together to reduce fatigue and strain, letting you ride further, faster, and more comfortably. Benefits: - Go further—reducing fatigue from bumps and vibrations - Ride faster—energy that is normally wasted suspending your body is converted into forward motion - Take control—customize your suspension feel to float over obstacles and maintain control Details: - 35mm of active suspension travel - Infinitely adjustable stiffness via pre-load adjustment and swappable springs - Adjusting stiffness / pre-load does not reduce travel - Swappable springs included to accommodate varied rider weight and preference - Optimized linkage geometry provides ultra-responsive suspension feel - Check technical specifications for compatibility What's in the Box: - 1 x ShockStop Seatpost - 2 x springs (1 pre-installed, 1 included in box for increased stiffness) - All required hardware

- Chromoly construction - Classic BMX design - Material: Cro-Mo - Setback: 0mm

- PIVOTAL Compatible - Ultra-light 6061 forged alloy construction - Reinforced wall construction - Setback: 0mm

ENVE's proven twin-bolt seatpost design refined for the modern road bike with seatpost battery integration capabilities. - Material: Carbon Fiber - Hardware Material: Titanium - Saddle Angle Adjustment: 0 – 27 degrees - Saddle Rail Compatibility: 7x10mm Carbon Rails / 7mm Round Alloy Rails - Torque Spec, Saddle Rail Clamp Bolts: 5.5Nm - Torque Spec, Seatpost Collar: Determined by your Frame manufacturer/Seatpost Collar - Weight: 210g (25.4mm), 204g (27.2mm), 204g (30.9mm), 204g (31.6mm)

The proven Transfer seatpost gets lighter and tighter. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth. "Factory" says it all. The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth, ultra-durable Genuine Kashima Coat. These products are World Cup proven. The Transfer continues the excellent reputation of smooth function and great reliability with an infinitely adjustable height design, and internal or external cable routing options. Low lever force and great modulation make it easy to regulate return speed and small height adjustments. The Factory Series Transfer features Genuine Kashima Coating for maximum performance. - Cable actuated with tool-free quick disconnect for easier installation and removal - Low lever force provides consistent actuation pressure even with saddle weighted or unweighted - Easy to modulate return speed with lever - Factory Series models feature Genuine Kashima Coat - Remote lever sold separately

Origin-8's Pro Fit Alloy Seat Post is made of light and durable forged aluminum that's been anodized and laser etched for a custom look. It also features an adjustable 2-bolt clamp that holds fast and lets you easily dial in your seat position. And, this fine post comes in a variety of diameters to fit almost any bike.

- Chrome - Sold individually

- XC - Gravel - Trail focused post - Two-position simplicity - Featherweight - Cable routes in either direction for compatibility with any dropper lever - Zero offset - 352g

The newly redesigned EC70 Seatpost takes our superlight unidirectional carbon and applies our patent pending ISA technology - Independent Saddle Adjustment - which allows for completely independent fore-aft adjustment and saddle adjustment. With the 2 pitch adjustment bolts, the saddle angle gets locked into place as if you were adjusting limit screws, and unlike single bolt designs, you get adjustability and security. Available in 20mm Setback and Zero configurations. - Finish: Matte Black UD Carbon/Matte Black Head - Weight: Zero offset, 210g; Setback offset, 223g - Head offset: 0mm; 20mm - Length: 350mm w/ 80mm min. insert - Quill size: 27.2mm - Rail clamps: 7mm round; 7mm x 9mm oval (both included) - Material: EC70 carbon

- Forged aluminum - 7/8-inch seat-clamp diameter - 165 grams

Ride longer, ride farther with the eeSilk premium suspension seatpost. The eeSilk is comparable in weight to traditional rigid performance seatposts while offering 20mm of vertical compliance improving control on rough surfaces and reducing fatigue on long rides. These posts make great enhancements to endurance road bikes by reducing the chatter transmitted from the surface to the rider and can be tuned to rider weight through a simple elastomer change. #5 elastomer comes pre-installed, other weight elastomers sold separately. - Travel: 20mm - Length: 375mm - Weight: 345g (eeSilk 27.2) - Max Rider Weight: 250 lbs. - Offset: 8mm

Our intention with Reverb AXS was inventive and pure: No hoses. No routing. No energy wasted. Not a single thing in the way of the experience. We created a reliable wireless-electronic dropper post and controller that actuates with drastically less effort and zero distraction. Expanding what's possible on a bike, Reverb AXS is enabled by SRAM AXS technology, a new level of interaction, personalization, and connectivity across all AXS-enabled components. - Effortless Electronic-Wireless actuation and infinite height adjustment with a single touch. - Clean, simple and fast to install. No hoses to route, no fishing required. - Updated internals for faster return speed in all conditions. - New Vent Valve Technology, a simple and reliable built in service solution without disassembly of the seatpost. - SRAM AXS technology, a new level of interaction, personalization, and connectivity across all AXS-enabled components. - Includes RockShox AXS handlebar controller, rechargeable SRAM battery, and charger.

The EA70 AX dropper post joins our AX series of horizon-expanding drop bar gravel and adventure componentry. Features include a reliable cartridge design, internal routing and availability in two lengths - 350mm and 400mm. Our EA70 AX post brings 50mm of drop, allowing for fitment on everything from your wide-tired CX bike to modern gravel bikes. - Can be paired with drop bar optimized levers or drop bar compatible shifters - Cable attaches from either direction for compatibility with all dropper levers - Two lengths for better fitment on dropped top-tube gravel bike frame designs - Finish: Black Ano - Weight: 350mm - 400g - Head Offset:0mm - Drop: 50mm - Quill Sizes: 27.2mm Diameter - Material: EA70 Alloy

Seatposts can be an overlooked part of the bike, but at Whisky Parts Co., everything gets the same attention to detail so your ride never suffers. Their seatposts are made from the highest quality carbon, ensuring they are durable, lightweight, and comfortable. Whether you’re remounting during a cross race or abusing them on the trail, you'll be glad you have the No.7. - Carbon shaft absorbs trail chatter - UD carbon shaft, forged aluminum head

ENVE's proven twin-bolt seatpost design refined for the modern road bike with seatpost battery integration capabilities. - Material: Carbon Fiber - Hardware Material: Titanium - Saddle Angle Adjustment: 0 – 27 degrees - Saddle Rail Compatibility: 7x10mm Carbon Rails / 7mm Round Alloy Rails - Torque Spec, Saddle Rail Clamp Bolts: 5.5Nm - Torque Spec, Seatpost Collar: Determined by your Frame manufacture/Seatpost Collar - Weight: 178g (25.4mm, 25mm offset), 168g (27.2mm, 0mm offset), 178g (27.2mm, 25mm offset)

The latest generation Thudbuster LT is superior to its predecessor in every way.  Building on Thudbuster's proven parallel linkage technology we have completely re-designed the seatpost for increased durability, additional suspension travel, as well as ease of use through tool-free elastomer change and a single-bolt seat clamp design. By improving on this already legendary design, we're confident to say that the newest generation Thudbuster is the most advanced suspension seatpost ever made. - Travel: 90mm - Weight: 750g (31.6mm) - Max Rider Weight: 250lbs

- 3D forged from 2014 heat-treated aluminum for optimal strength to weight ratio - Race Face's triple butting design maintains strength in critical areas while reducing overall weight - The tube is anodized & shot peened for increased fatigue life - Updated Hunter head design for easy saddle installation and full adjustability - 3D forged from 2014 heat treated aluminum with triple butted mast - Thumbscrew tightening system allows quick dial-in of the saddle angle by hand - Angled clamp bolts allow easy tool access for hassle free adjustment - Rubber grommet seals the post to prevent water from entering seat tube - Accepts 7/8mm CrMo/alloy and 7/9mm carbon rails. 260g (30.9mm)

3D forged one-piece AL7050-T6 construction - Wide saddle clamp design reduces rail stress and flex - Micro-adjust 2 bolt clamp design - 15mm setback - ISO-Mountain safety certified

Dimension Two-Bolt Seatposts provide a sturdy and durable saddle perch for cross country and all-mountain riding in three diameters, rigorously tested to ISO 4210 Mountain standards. - Constructed with AL-6061-T6 aluminum - Shot-peened finish - 0mm offset